03 Freelander

[admin]

acmemag writes:

We are going to be doing a water pump on a 03 freelander are the special tools needed . also anythings to watch out for would be helpful
thanks and have
a great day
mag

[admin]

Mike writes:

There are special tools for the timing belts that are needed to set
them back in the correct position. The cam gears have no timing marks
only the crankshaft does. It can be done without them if you make your
own marks on the timing gears prior to removing the timeng belt to
access the water pump. Also make sure to line the "safe" marks up so
there is no valve to piston contact. The marks are on the timing cover
and the crank pulley. good luck.
Mike